Rovertech 2.0

xsteven07

As titled
N/s shaft r8 with abs
Cooler pipe from lower metal pipe to water pump
Top coolent pipe 220 from rad to stat non air con
Stainless lower coolent pipe if anything around
Can arrange my own courier if need be...

xsteven07

I have a 220 turbo block one complete 105k , one stripped but requires rebore for 86mm pistons if you are doing a build it be ideal

xsteven07

As above needed to take around 300bhp , using a ap clutch at the minute and started to slip at 224bhp

, need better clamping force ...

xsteven07

Rover 220 turbo oil pump need with cooler out let's ideally new or known to be good with no issues can collect if local to midlands or can arrange collection with a courier

xsteven07

I have a diesel box mate and lsd with steel caged bearings inbox me

xsteven07

Update , still don't source any pistons or rods yet person mensioned above sold that set so if anyone else has a set or just pistons that are good then let me know thanks in advice ste

xsteven07

edward22 wrote:southlake mini center have them at 160 pound a set on ebay

You don't have link do you ?? Thanks

xsteven07

As titled if anyone as got one or can point me in right direction thanks

xsteven07

+1 for bottom pipe

xsteven07

Thanks for all your help guys - cracking bunch @rovertech

xsteven07

tomcat wrote:
xsteven07 wrote:Or just one m series rod if anyone got one ?

Roy (racer) has a set of top end Connecting Rods - Pauter he was looking to sell

regards
Scott

Can't see to find him on here ? ...

xsteven07

Or just one m series rod if anyone got one ?

xsteven07

As titled, must be good condition no issues , just see if anyone got a set they not using before I go new from Gbe

xsteven07

Got a block, but it's from a 220 turbo tin sump and with oil oiler etc, if for a 220 will be hassle free fitment has the alloy sump sits higher up so exhaust may be an issue if u use an 620 set up, inbox me if u interested thanks

xsteven07

I'm still here "active" wondering . .

xsteven07

xsteven07 wrote:Hi all few bits i'm in need for my gsi

Arp Head Bolts

Stainless lower coolent pipe non air con

Cookie down pipe

and thats it for now

Cash waiting

Bump anyone ???

xsteven07

Hi all few bits i'm in need for my gsi

Arp Head Bolts

Stainless lower coolent pipe non air con

Cookie down pipe

and thats it for now

Cash waiting

xsteven07

Is this still going ahead? ....

xsteven07

T16 220 freeflow downpipe or cookie for my gsi and a uprated manifold is any 1 got 1

xsteven07

russ220 wrote:In fact im heading over dudley way tomorrow evening (7-9pm) - i dont mind bringing them with me n i could pop by yours if need be?

Inboxed you .

xsteven07

Mine is on a n plate , could you confirm they be up for the job?

xsteven07

Hi. i'm after a set of gsi front wings for my Rover 220 gsi or if anyone know a place i can get new ones that be grat thanks

xsteven07

Storm_Uk wrote:
xsteven07 wrote:
boing wrote:If you still need one drop me a PM
update , havent been on for a while , i went all out and got full set of vibra mounts thanks all
I did the same, have you noticed slightly more engine vibration with these on?

They are great mounts though and should last the lifetime of the car.

xsteven07

boing wrote:If you still need one drop me a PM

update , havent been on for a while , i went all out and got full set of vibra mounts

thanks all

xsteven07

Edited post with a working picture

xsteven07

Number 10 is what i am needing , please

xsteven07

xsteven07 wrote:T16 rover 220 turbo engine mount wanted Cam-belt side the rubber one . i have seen the vibra-technics one, but was wondering if someone has one or a standard mount before ordering ?, thanks in advance

Take it no one got a spare one knocking about then ....

xsteven07

T16 rover 220 turbo engine mount wanted Cam-belt side the rubber one . i have seen the vibra-technics one, but was wondering if someone has one or a standard mount before ordering ?, thanks in advance

xsteven07

Seats are Sound only loom and Ecu Left , thanks for your interest

xsteven07

Sorry Guys , Car been Sold Complete

xsteven07

Sorry only pic i got , all panels are fair condistion , mint interior ! leather cream , message if need any thing ! Nasp - Non Turbo ( EDITED )

xsteven07

T16 Wiring loom from nasp , with loom , £80 plus postage

xsteven07

Hi bud if your struggling for the drive shaft the ti ones are the same but you will need to switch the inner joint me thinks Manifold bolts get stainless ones off ebay as they are better than the oe ones Arms someone will have some Its got stainless ones in it which iv used but seem to be working t...

xsteven07

Hi all , i'm in need of a few bits ,Will collect if local to west-midlands , failing that i pay postage thank's Needed 1, 220 turbo pas pipes 2, Bottom arms with the power flex bushes in 3, Where best place to get ARB bushes from ? ... 220 rack on and 220 sub-frame 4, A decent set of drive shafts

xsteven07

P.Med

Rovertech 2.0

Search found 208 matches

Few bits wanted

Re: bare engine block wanted midlands

T16 clutch

220 oil pump

Re: gear box in the midlands needed holiday 2 days.. sorted

Re: T16 forged rods wanted

Re: T16 220 turbo crank kit

T16 220 turbo crank kit

Re: 220 turbo lower rad pipe

Re: T16 forged rods wanted

Re: T16 forged rods wanted

Re: T16 forged rods wanted

T16 forged rods wanted

Re: rover t16 engine

Re: Head count - If you are active, let us know!

Re: Parts needed t16

Parts needed t16

Re: GBE / Cookie Elbow/Downpipes

Freeflow

Re: Gsi Wings

Re: Gsi Wings

Gsi Wings

Re: T16 Mount wanted

Re: T16 Mount wanted

Re: T16 Mount wanted

Re: T16 Mount wanted

Re: T16 Mount wanted

T16 Mount wanted

Re: T16 engine loom and tomcat interior !

Re: 220 breaking (Admin Please delete )

220 breaking (Admin Please delete )

T16 engine loom with ecu NASP

Re: drive shafts and few bits needed

Turbo, few bits needed - UPDATED -

Re: NFR 220 Coupe Turbo with full cream leather