Rovertech 2.0

nikolas

You need the longer bracket for a PG1, with the R65 bracket you'll find that the differential housing sits right up against the rear subframe. You need the bracket to give you clearance as the PG1 is larger than an R65. since i have pg1 on, and differential housing doesn't sit right up against rear...

nikolas

The short one mounts to the cambelt side engine mount on the top side, it was never supposed to be fitted between the subframe and sump bracket and you wouldn't be able to anyway as it's far too short. Like I said, you need the relevant sump bracket, it pushes the bottom of the engine further away ...

nikolas

this is a picture of the arm on my car and under it there is the shorter arm that was fitted (if i m not mistaken) on the other models..

nikolas

i ll try to take a picture under car to check if this is longer or not..

nikolas

hi mate according to this http://www.rimmerbros.co.uk/Item--i-GRID001237 the part i m talking about is different on 1400 and on 1800vvc i think..
(Rover 200vi)

nikolas

i mean the arm that holds also the bush..
i m quite sure that they have different length between r65 and pg1.. hence the different part numbers..

nikolas

hi.. i need the lower mount the one that fits between the oil sump and rear frame and "pushes" engine to the back in order pg1 to fit.. there are two types, the short one (i think this one was for r65 200/25/zr) and the long one for Vi/BRM.. i need the long.. i ve seen here http://www.rimm...

nikolas

was the 2+2 setup also in black with blue inserts available? or this colour combination was only at ZR for 2+3 setup?

nikolas

just curious..what extra is needed to fit the brembo calipers..?

nikolas

i guess everyuone who has done it, has ended up with a custom solution..?

nikolas

anyone making adaptors to fit gas struts on a Rover 200 ?

nikolas

Cableguy wrote:
nikolas wrote:can it get connected through aux? yellow/red/white? also how much you d be looking for it mate?
Why would you want to connect a HD source via composite video ?

because i want to check if it can be connected with alpine iva-d310

nikolas

can it get connected through aux? yellow/red/white? also how much you d be looking for it mate?

nikolas

as in the title..
in mint condition..
preferably up to 50gbp including p+p

nikolas

placed an offer, last one..cause it has taken too long..
consider it and decline it or accept it..

nikolas

still looking...

nikolas

stilll after one brm handbrake..

nikolas

Postage abroad is quite expensive plus it is something i have never done so would feel more comfortable posting within the UK. But then again there is a first time for everything. ok, better offer...25gbp delivered for the handbrake.. Nikolas i only post within the UK im afraid. mate, with all due ...

nikolas

ok, better offer...25gbp delivered for the handbrake..

nikolas

and still interested for the handbrake

nikolas

thank you Mike, i ve sent a couple of pms to Alan, and also made him an offer through the thread you pointed me..but still haven't come to an agreement..

nikolas

had an agreement with Liam about a vvc manifold and a tb but in April...but never arrived over here..I don't blame him for the potential loss of the parcel through royal mail, but i was promised that i would get a refund by the end of June, but nothing yet.. i wish we had used signed for delivery so...

nikolas

bought brm gearbox, flywheel, driveshafts, starter motor gear linkage and other stuff needed for pg1 conversion from Graeme and everything was smooth even though we were hundred miles away..

very nice guy..

nikolas

as in the title..if someone has one which is of no use to him let me know..

nikolas

i think i ll be reminding you of my interest until someone else shows up and decides to buy it..hehe

nikolas

i found even some spare switches, so these are more than enough for me..only handbrake have left to acquire..
I have sent you link in your inbox with shipping cost information through royal mail.

nikolas

you don't respond to pm though Alan...

nikolas

p.s. today is my birthday, so i hope someone can find these two minor parts for me..

nikolas

to be more specific..
i m looking for parts number 27 and number 28
http://www.rimmerbros.co.uk/Item--i-GRID001086

nikolas

pm sent

nikolas

nikolas wrote:my offer on the handbrake still applies..

on the 20gbp posted

nikolas wrote:are the switches available..??

i found switches, but if you feel like a better deal for you for both of them at 30gbp posted i m ok..

nikolas

are the switches available..??

nikolas

just reminding..

nikolas

my offer on the handbrake still applies..

nikolas

sold locally for the same price as offered here, without the barrier of the shipping cost, so it ended up well for me.. @98Ti, alexcornwall, as far as i can understand there is a kind of irony in your posts, and can't understand why..i put sth on sale, no one is oblidged to buy it and you definately...

Rovertech 2.0

Search found 87 matches

Re: Engine lower mount Rover Vi

Re: Engine lower mount Rover Vi

Re: Engine lower mount Rover Vi

Re: Engine lower mount Rover Vi

Re: Engine lower mount Rover Vi

Re: Engine lower mount Rover Vi

Engine lower mount Rover Vi

Re: Streetwise 2+2 seats

Re: Brembodge calipers, Stebtech & Roversport mounts

Re: Bonne5 gas struts adaptors..

Bonne5 gas struts adaptors..

Re: Western Digital (2nd gen) HD TV media player..

Re: Western Digital (2nd gen) HD TV media player..

Western Digital (2nd gen) HD TV media player..

Re: Last few BRM parts

Re: BRM handbrake handle..

Re: BRM handbrake handle..

Re: Last few BRM parts

Re: Last few BRM parts

Re: Last few BRM parts

Re: BRM handbrake handle..

Re: MgZrTurbo2008

Re: goldie - My Feedback Thread

BRM handbrake handle..

Re: Last few BRM parts

Re: Last few BRM parts

Re: Last few BRM parts

Re: A little mount for the a/c Rover 200 96-99

Re: A little mount for the a/c Rover 200 96-99

Re: Breaking ZR160 in silver code MNX

Re: Last few BRM parts

Re: Last few BRM parts

Re: A little mount for the a/c Rover 200 96-99

Re: Last few BRM parts

Re: BMC CDA 85-150