heeelp

cocacola · Post by **cocacola** » Thu Sep 14, 2006 3:46 pm

urgently!!!! need gbox for my ti now or council gonna move it!

anyone got owt i can fit?
i dont mind a non torsen for now till i rebuild mine

Squaddiemodo · Post by **Squaddiemodo** » Thu Sep 14, 2006 4:01 pm

where do you live?

cocacola · Post by **cocacola** » Thu Sep 14, 2006 4:04 pm

castleford near leeds

chavtown

Squaddiemodo · Post by **Squaddiemodo** » Thu Sep 14, 2006 4:09 pm

Damn a bit far for me i am in Dorset.

cocacola · Post by **cocacola** » Thu Sep 14, 2006 4:11 pm

yeah bit far hehe, thanks anyways

mach1rob · Post by **mach1rob** » Thu Sep 14, 2006 5:24 pm

Can you not get a nasp box from a 2/420 or an 820 from scrappy up there? Usually plenty about cheap as that will do temporary till you get yours rebuilt?

cocacola · Post by **cocacola** » Thu Sep 14, 2006 6:26 pm

do they al fit straight on? i didnt know if driveshafts etc were same size

mach1rob · Post by **mach1rob** » Thu Sep 14, 2006 8:39 pm

Yes, shafts will go in too, if it tides you over and stops council taking it away then probably the easiest and cheapest method to get it moveable

Post by **Punx0r** » Thu Sep 14, 2006 10:27 pm

820 box will have the same hydraulic clutch, the same speedo drive and are the easiest to find in scrappies in my experience.

Just make sure you end up with the right driveshaft seals to match your Ti's driveshafts.

cocacola · Post by **cocacola** » Sun Sep 17, 2006 2:06 pm

ive got one from a 620si for nowt, reckon this will be ok for temp?

Beaker · Post by **Beaker** » Sun Sep 17, 2006 2:07 pm

Squaddiemodo · Post by **Squaddiemodo** » Sun Sep 17, 2006 2:09 pm

Doubt it would fit, different engines

620si is a honda lump

Ti is a rover lump

cocacola · Post by **cocacola** » Sun Sep 17, 2006 2:15 pm

oh eck, so it needs to be off an 820?

Squaddiemodo · Post by **Squaddiemodo** » Sun Sep 17, 2006 2:16 pm

820
620 Ti
420
220

cocacola · Post by **cocacola** » Sun Sep 17, 2006 2:17 pm

cool thx