Page 1 of 1
heeelp
Posted: Thu Sep 14, 2006 3:46 pm
by cocacola
urgently!!!! need gbox for my ti now or council gonna move it!
anyone got owt i can fit?
i dont mind a non torsen for now till i rebuild mine
Posted: Thu Sep 14, 2006 4:01 pm
by Squaddiemodo
where do you live?
Posted: Thu Sep 14, 2006 4:04 pm
by cocacola
castleford near leeds
chavtown
Posted: Thu Sep 14, 2006 4:09 pm
by Squaddiemodo
Damn a bit far for me i am in Dorset.
Posted: Thu Sep 14, 2006 4:11 pm
by cocacola
yeah bit far hehe, thanks anyways
Posted: Thu Sep 14, 2006 5:24 pm
by mach1rob
Can you not get a nasp box from a 2/420 or an 820 from scrappy up there? Usually plenty about cheap as that will do temporary till you get yours rebuilt?
Posted: Thu Sep 14, 2006 6:26 pm
by cocacola
do they al fit straight on? i didnt know if driveshafts etc were same size
Posted: Thu Sep 14, 2006 8:39 pm
by mach1rob
Yes, shafts will go in too, if it tides you over and stops council taking it away then probably the easiest and cheapest method to get it moveable
Posted: Thu Sep 14, 2006 10:27 pm
by Punx0r
820 box will have the same hydraulic clutch, the same speedo drive and are the easiest to find in scrappies in my experience.
Just make sure you end up with the right driveshaft seals to match your Ti's driveshafts.
Posted: Sun Sep 17, 2006 2:06 pm
by cocacola
ive got one from a 620si for nowt, reckon this will be ok for temp?
Posted: Sun Sep 17, 2006 2:07 pm
by Beaker
yup
Posted: Sun Sep 17, 2006 2:09 pm
by Squaddiemodo
Doubt it would fit, different engines
620si is a honda lump
Ti is a rover lump
Posted: Sun Sep 17, 2006 2:15 pm
by cocacola
oh eck, so it needs to be off an 820?
Posted: Sun Sep 17, 2006 2:16 pm
by Squaddiemodo
820
620 Ti
420
220
Posted: Sun Sep 17, 2006 2:17 pm
by cocacola
cool thx