Guaging interest in breaking highish spec 220 coupe turbo

[Cableguy]

Gauging interest in breaking the coupe to see if its worth continuing or not. I wont break it unless im confident i can move 90% of the bits on fairly easily.

2.0 T16/M16 Hybrid Turbo Engine c/w
M Series Pistons
M Series Rods
Oversized Niffler Rings
Covered 5,000 miles and doesnt smoke unless you break 22/23 psi and even then your foot has to be on the floor for a while.
Built up with oil pump/sump/front housing and adaptor plate/flywheel

£300

Skimmed and Rebuilt Head
Pressure tested , new cam seals , valve oil seals, valves lapped in by hand , tappets drained etc. etc.. no taps.

£150

Pipercross Induction Kit £25
2.5" Magnex Exhaust System With 6 x 3 Exit £175
2.5" Longlife Decat £30
Yellow Polyurethane Exhaust Hangers £15 3 off
GBE one piece freeflowing elbow and downpipe £200
Magnecor 8.5mm Ignition leads £40
Gizzmo IBC Electronic Boost Controller Set £130
Battery To Boot Conversion + One Off Custom Battery Cage £50
Breather Filter + Catch Tank £40
Loom Recovered in Silver £10
SFS Silicone Boost Hoses £60
Stebtech TB Bracket £15
T28 Turbo from S14 200 SX £200
Roversport Radiator with fresh refurb £125
8" Spal Fan £40
Baileys DV26 Dump Valve (anodized red) £20
Pulsar Calsonic Core Intercooler £60
GBE Fuel Cut Defender £15
NGK Iridium spark plugs - BKR7EIX £30
XS power External Wastegate with screamer pipe £200

Gearbox/Clutch

620 Ti Short Ratio Gearbox with Type B diff no whines £150
Black Diamond Clutch £75
Very Short Shifter + modded linkage + poly bushes £75

Chassis and Suspension

Lowered 40mm on Gmax Springs £50
Complete Front End Polybush Kit £50
Complete Rear End Polybush Kit - Trailing Arm £50
Solid Front Engine Stabiliser Bar £25
Front Upper Strut Brace £30

Exterior

Green side repeaters £5
17" 6 Spokes £150
Mynheer Side Skirts £50
Mynheer Rear Splitters £50
Colourcoded Bump Strips £20
Jap arch extensions £75
Renault Espace Front Splitter £20
Roversports Racer Front Grille £25

Interior

Full Sandstone Leather Interior £100
Double gauge A Pillar Pod £10
Turbo Boost Gauge £15
Innovate LC1 Wideband Lamba £135
Innovate G2 Blue AFR Gauge for LC1 £50
MK3 Dash from ZR £50

Brakes

Front:-
Prelude Calipers
ZS Discs
Ti Mintex Pads

Rear:-
Grooved Discs
recent pads

£150 the lot.

Ill see what interest there is and make my mind up within a week or so.

Cheers

edit , few pics to see what your buying

[carl747]

This is a wkd car please don't brake it

but dibs on the 17" 6 Spokes if you do

[ttrw2]

I'd take the engine Dan

probably a few other bits too TBH

Rob

[speedx]

would be interested in the wastegate and screamer dude!
intercooler if it came with pipework and the spal fan¬!

possibly the bottom end as well

[Cableguy]

I'd take the engine Dan

probably a few other bits too TBH

Rob

Just the block , or as a complete engine ?

For your car is it ?

[Berger]

Ill take the engine behind Rob, to clarify, just the bottom end.

The polybush sets.

When you say they are complete. Do you mean front arms, drop links, arb mounts etc.

And the same for the rear, the trailing arm bushes and all the other bushes, the ones for the banana at the rear and the front of the trailing arm, the drop links, arb mounts, etc etc?

If so then ill take them.

You know im always able to collect at some point and can take parts for C2K/ttrw2.

[Cableguy]

Sound.

Polybush would be everything yeah , no bushes were missed.

When you say engine , head aswell ?

[C2K]

I'd have the exhaust hangers.

Jizzmo y0!

[Cableguy]

I'd have the exhaust hangers.

Every little helps

[Gibbo]

Dont actually believe your thinking of doing this! All them hours uve put into this, and the amount of help you've had off me!!!

[Null_Byte]

You might want to cross the clutch off the list Dan

[Cableguy]

You might want to cross the clutch off the list Dan

Thats actually still present and correct, ive managed to get a replacement friction plate and my cover plate is ok. I just might not bother putting it back together

[kash]

YOUR MAD and have PM

[agw_01]

I'll have the side skirts

[BazR]

I would be interested in the Turbo

[Allanwarnock]

Elbow, downpipe and boost controller.... i'l have them m8

[TheRealStig]

Defo have the magnecores and induction kit off you mate

possibley the intercooler if we could do a deal with the pipework

[ravinder]

Dibs on the polybushes please!

[ravinder]

Any pics of the battery boot cage?

[Berger]

Dibs on the polybushes please!

In behind me thank you very much!

[jaguar82]

Dump Valve

[220 tubz]

Battery To Boot Conversion + One Off Custom Battery Cage £50
Stebtech TB Bracket £15

[Din]

WTF Dan

[Roger Red Hat]

splitter!

2nd dibs on the elbow

how come breaking it then? bit to much punishment at combe?

what other polybush stuff is on the car? droplinks?

[Cableguy]

Right , ive made a decision.

For the time being im keeping it, i managed to get a flywheel and clutch sorted at a decent price and sorted some other niggles out quite cheaply.

If the car doesnt behave how i want it to after this then i will be re opening this thread

However there are a few items that im going to move on from it to recoupe costs/upgrade current items.

I will contact the folks who asked about these items via pm.

When the time does come then the prices and people who have dibs will be contacted first.

Cheers guys

[Imran]

i might have the rad off you

[Cableguy]

Got some good refurbed standard sized ones though

[agw_01]

Nice one Dan, would be a shame to break after all the work!

Defo keep me in mind about the skirts though! Nice skirts for the R8 are like rocking horse doo-doo.

[Cableguy]

Fairly sure the skirts and rear pods will be coming off before christmas anyway mate so ill keep in touch

[Imran]

Got some good refurbed standard sized ones though

Dan - mine is pretty new already (std).. if you let this RS one got drop me a pm mate

[Chris_200]

I would have the Rad