Page 1 of 1

BRM breaking cheap offers welcome.

Posted: Wed Jul 22, 2009 8:53 pm
by VVC MINI
Image

Complete front bumper with spots and mesh £35

BRM front top grill sold

Front wings £5 each

Headlights £10 each

Bonnet £10

Doors £10 each

Rear tailgate complete with spoiler £20

Complete rear beam setup with calipers brake pipes everythink to convert to disks £100

Rear lights £10 pair

Rear bumper £15

Complete MGZR diesel exhaust with shiny tip which i believe is very good on turbo engine offers

Interior sold

No engine or wheels or front frames.

Don't pm me offers put them in this post but every think must go by Saturday afternoon or will be crushed.

Car is located in center Birmingham. Any other parts required that are in that pic just ask for price.

If anybody is interested in the whole car i will sell for £300 but has no engine or interior but does have 10 months MOT and a month of tax left and half a tank of fuel :lol: .

Re: BRM breaking offers welcome.

Posted: Wed Jul 22, 2009 8:55 pm
by stefaclese
Steering rack?

Re: BRM breaking cheap offers welcome.

Posted: Wed Jul 22, 2009 8:56 pm
by VVC MINI
Sorry but steering rack and master cylinder are now in my coupe.

Re: BRM breaking cheap offers welcome.

Posted: Fri Jul 24, 2009 8:07 am
by ti or not ti
Drivers door please mate - however what do you think it will fit in?

I'm only down the road in Coventry so can collect ASAP.

Re: BRM breaking cheap offers welcome.

Posted: Fri Jul 24, 2009 11:08 am
by matt077
i have your rear beams to convert my 25 to disc's on the back tho cant pay untill next month :(

Re: BRM breaking cheap offers welcome.

Posted: Fri Jul 24, 2009 11:58 am
by ttrw2
What's wrong with the shell and what exactly comes with it for £300?

Re: BRM breaking cheap offers welcome.

Posted: Fri Jul 24, 2009 5:37 pm
by VVC MINI
Sorry Matt but if you want the rear beam ill need it going asap as i don't have much room to keep it lying about.

ti or not ti has dips on the door.

The only thing wrong with the car is theirs a dent on the passenger side by the rear wheel low down. Also a small rust scab on the tail gate. Apart from that theirs some very minor scratches.

Parts missing on the car are.

Interior
engine gearbox
master cylinder
front frames
steering rack
front top grille and driver door.

Also i don't have the original type B torsion for all the PMs im getting.

Heres my phone number as i won't be on the computer again now until tomorrow afternoon which the car will be gone. So any offers welcome also you may have to remove parts your self if you come down because i might not have time to remove everything from car.

07890509629

Re: BRM breaking cheap offers welcome.

Posted: Fri Jul 24, 2009 5:47 pm
by matt077
i can give you my drinking money for 2night which is £20 mate? :(

Re: BRM breaking cheap offers welcome.

Posted: Fri Jul 24, 2009 11:18 pm
by nathan 25
steering wheel and alloys? price on both please, cheers nathan

Re: BRM breaking cheap offers welcome.

Posted: Sat Jul 25, 2009 10:11 am
by ti or not ti
have just txt VVC mini as i cannot get the van i need to get the bits i want - so boys get in touch with him.

Dan

Re: BRM breaking cheap offers welcome.

Posted: Sat Jul 25, 2009 6:24 pm
by 1.6 tourer
wat you looking at for the orange bit on the front bumper :D

Re: BRM breaking cheap offers welcome.

Posted: Sat Jul 25, 2009 6:28 pm
by VVC MINI
Sorry but the wheels are gone but i do have some vvc coupe alloys, turbo alloys left.

Matt im going down hams latter but ive saved the rear beam axle. Its complete with both hand brake cables and links to the hand brake. Ive got some pics which ill upload them later. I havent cut any pipes and is all ready to fit. If you what to give me a small depoist ill keep it for you.

Also the Zr exhaust is like new with a decat pipe and is a big bore which will bolt onto the T series down pipe. Offers on that. Lots of parts gone only the bonnet and 1 door left now.

Re: BRM breaking cheap offers welcome.

Posted: Sun Jul 26, 2009 9:46 pm
by VVC MINI
Still available is complete tail gate with gas struts.
Complete exhaust with decat and big tip. Which is big bore and will bolt to a t series downpipe.
Complete rear beam with cables and pipes intact all ready to bolt on. This is a BRM beam which i believe maybe stiffer than standard with a big anti roll bar.

Image
Image
Image
Image

Re: BRM breaking cheap offers welcome.

Posted: Mon Jul 27, 2009 10:59 am
by matt077
VVC MINI wrote:Sorry but the wheels are gone but i do have some vvc coupe alloys, turbo alloys left.

Matt im going down hams latter but ive saved the rear beam axle. Its complete with both hand brake cables and links to the hand brake. Ive got some pics which ill upload them later. I havent cut any pipes and is all ready to fit. If you what to give me a small depoist ill keep it for you.

Also the Zr exhaust is like new with a decat pipe and is a big bore which will bolt onto the T series down pipe. Offers on that. Lots of parts gone only the bonnet and 1 door left now.
thanks mate :D

how much for a depoist?

Re: BRM breaking cheap offers welcome.

Posted: Mon Jul 27, 2009 11:17 am
by Andy25
What condition are the wings in

Re: BRM breaking cheap offers welcome.

Posted: Mon Jul 27, 2009 10:17 pm
by VVC MINI
Exhaust sold.
Matt if you can collect the beam before end of next week its yours with no deposit. But its sitting out side so the disks will go rusty :wink: . I have another guy interested so you have first dibs atm.

The car is gone only tail gate left. No other parts available sorry to slow.

Re: BRM breaking cheap offers welcome.

Posted: Mon Jul 27, 2009 10:37 pm
by matt077
VVC MINI wrote:Exhaust sold.
Matt if you can collect the beam before end of next week its yours with no deposit. But its sitting out side so the disks will go rusty :wink: . I have another guy interested so you have first dibs atm.

The car is gone only tail gate left. No other parts available sorry to slow.
i dont get paided untill the 15th :cry:

how much are you after mate? :)