Any interest S14 manifold parts

ryan_220 · Post by **ryan_220** » Sat Jun 20, 2009 10:19 am

Thinking of getting, that being T16 flanges cut from plate as its as easy to make 10 than one.
Basicly the main part needed to convert the S14 Apex Type 1v2 tubular manifold to T16 fit.

If you ent interested dont spam this post as iam only doing this to help people out !

Neill · Post by **Neill** » Sun Jun 21, 2009 2:37 am

Be interested as the S14 manifold itself i have seen for 120 quid so could hopefully work out reasonable.

Post by **agw_01** » Sun Jun 21, 2009 2:50 am

I'd be interested in a price and then go from there

Rizzy · Post by **Rizzy** » Sun Jun 21, 2009 5:53 am

possibly dependant on price!

ryan_220 · Post by **ryan_220** » Sun Jun 21, 2009 2:13 pm

thats 6 i will get on this tomorrow at work

ttrw2 · Post by **ttrw2** » Sun Jun 21, 2009 4:15 pm

Yep x2 dependent on price

ptomo · Post by **ptomo** » Tue Jun 23, 2009 6:19 pm

+1 on price

RobBBoi · Post by **RobBBoi** » Thu Jun 25, 2009 9:30 am

I'll be interested.

Chris_200 · Post by **Chris_200** » Thu Jun 25, 2009 12:10 pm

And another....

ryan_220 · Post by **ryan_220** » Fri Jun 26, 2009 6:35 pm

Just getting the drawings drafted up should be in 10mm stainless

Drew · Post by **Drew** » Fri Jun 26, 2009 8:42 pm

id be interested in a flange. my laser cant cut 10mm+ stainless

there is a guy on metropower, ralph, who works for a water jet place. might be worth a pm to see what he can do?

Drew

420gsitlover · Post by **420gsitlover** » Fri Jun 26, 2009 10:26 pm

im up for one depending on price

Crome · Post by **Crome** » Tue Jul 14, 2009 12:10 pm

I could be interested too

Crome

David-Ti · Post by **David-Ti** » Tue Jul 14, 2009 9:43 pm

David-Ti · Post by **David-Ti** » Fri Jul 31, 2009 10:27 am

Any news on these? This is definately something I'd be interested in.

edit: if anyone can tell me the dimensions from cyl head flange to outer most point on the apex manifold it would be much appreciated.

ryan_220 · Post by **ryan_220** » Sun Aug 02, 2009 10:50 am

Will push this in the week and let you all know buy the end of the week.
I think its been long enoth i dont want one anymore but i wont let you lot down.
Can we start a list so we know the numbers

EG

1.
2.

David-Ti · Post by **David-Ti** » Sun Aug 02, 2009 12:21 pm

1. David-Ti
2. Null_Byte
3.
4.
5.
6.
7.
8.
9.
10.

daz500 · Post by **daz500** » Sun Aug 02, 2009 1:24 pm

1. David-Ti
2. Null_Byte
3. Daz500 (possibly 2 depending on price)
4.
5.
6.
7.
8.
9.
10.

Chris_200 · Post by **Chris_200** » Sun Aug 02, 2009 7:43 pm

1. David-Ti
2. Null_Byte
3. Daz500 (possibly 2 depending on price)
4. Chris_200
5.
6.
7.
8.
9.
10.

214_si · Post by **214_si** » Sun Aug 02, 2009 9:46 pm

Chris_200 wrote:1. David-Ti
2. Null_Byte
3. Daz500 (possibly 2 depending on price)
4. Chris_200
5. 214_si
6.
7.
8.
9.
10.

karl210 · Post by **karl210** » Tue Aug 04, 2009 1:06 pm

1. David-Ti
2. Null_Byte
3. Daz500 (possibly 2 depending on price)
4. Chris_200
5. Karl210
6.
7.
8.
9.
10.

Crome · Post by **Crome** » Fri Aug 07, 2009 5:47 pm

1. David-Ti
2. Null_Byte
3. Daz500 (possibly 2 depending on price)
4. Chris_200
5. Karl210
6. Crome
7.
8.
9.
10.

ttrw2 · Post by **ttrw2** » Fri Aug 07, 2009 7:18 pm

1. David-Ti
2. Null_Byte
3. Daz500 (possibly 2 depending on price)
4. Chris_200
5. Karl210
6. Crome
7. ttrw2 (Rob) x2 depending on price
8.
9.
10.

Deckz · Post by **Deckz** » Fri Aug 07, 2009 9:21 pm

Roughly what price??

This so a S14 manifold can fit a T Series>

karl210 · Post by **karl210** » Sat Aug 08, 2009 7:16 pm

any news on this yet?

ryan_220 · Post by **ryan_220** » Sun Aug 09, 2009 12:23 pm

karl210 wrote:any news on this yet?

No on hoilday dont suprise me really

m220syg · Post by **m220syg** » Sun Aug 23, 2009 4:06 pm

im interested put me dwn for 1

5teve L · Post by **5teve L** » Mon Aug 24, 2009 5:22 pm

7:02 0
Posts: 764
Location: Midlands

1. David-Ti
2. Null_Byte
3. Daz500 (possibly 2 depending on price)
4. Chris_200
5. Karl210
6. Crome
7. ttrw2 (Rob) x2 depending on price
8.
9.Steve (dependant on price)
10.

Post by **Cableguy** » Mon Aug 24, 2009 5:24 pm

How thick does the flange need to be guys ?

If its less than 10mm thick i could prob laser cut it.

You got a dxf drawing ryan ?

TheRealStig · Post by **TheRealStig** » Mon Aug 24, 2009 5:50 pm

i will defo be interested depending on price

Drew · Post by **Drew** » Sun Sep 13, 2009 11:47 am

i found a .dwg of the manifold flange i did a few years back, i have used it and it did fit.

Drew

Post by **Mitus** » Thu Sep 17, 2009 3:21 pm

1. David-Ti
2. Null_Byte
3. Daz500 (possibly 2 depending on price)
4. Chris_200
5. Karl210
6. Crome
7. ttrw2 (Rob) x2 depending on price
8.
9.Steve (dependant on price)
10. Mitus (dependant on price)

T16COUPE · Post by **T16COUPE** » Thu Sep 17, 2009 8:03 pm

1. David-Ti
2. Null_Byte
3. Daz500 (possibly 2 depending on price)
4. Chris_200
5. Karl210
6. Crome
7. ttrw2 (Rob) x2 depending on price
8. Steve (dependant on price)
9. Mitus (dependant on price)
10. t16 coupe depending on price

cris220 · Post by **cris220** » Mon Sep 21, 2009 11:00 pm

me too... any news and how much?

ryan_220 · Post by **ryan_220** » Tue Sep 22, 2009 11:00 am

I am waiting for the companys to get back to me on price. 10mm s/s is not something everyone can do.

Rovertech 2.0

Any interest S14 manifold parts

Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts

Re: Any interest S14 manifold parts