220 nolathane engine mounts

[tonyrally]

just making enquiries at the moment would anyone be interested in a set dependant on price?

i would need a set of your old mountings to be reconditioned
as most of you will know the standard mountings for the 220 are a small fortune for what they are.

just waiting on a reply if not will give them a call monday


anyone who may be interested post your names below thanks tony

[BazR]

Whats the turn-around time on this?

[tonyrally]

not sure yet will find out when iv spoke to them just waiting on a reply for price per set plus the postage. im going to ring them tomorow an find out whats what so will post up there reply regards tony

[Null_Byte]

Don't forget the time difference if your phoning them.

[ttrw2]

1. ttrw2 (Rob) - possibly two sets (I have olds).

[agw_01]

I already have polybushed stabilisers but I'd be interested in the front, rear and cambelt mounts

1. ttrw2 (Rob) - possibly two sets (I have olds).
2. agw_01 - Mounts only, no stabilisers

[BazR]

1. ttrw2 (Rob) - possibly two sets (I have olds).
2. agw_01 - Mounts only, no stabilisers
3. BazR - Two sets ( depending on turnaround time )

[MarkCoupe]

Mounts look good, what sort of hardness/ shore are they Tony?

[tonyrally]

Mounts look good, what sort of hardness/ shore are they Tony?

not sure on wat sorta compound they are but evcl36 did say the increase vibration.

on another note iv heard back from autolign just awaiting a price for ten lots now. an need to find out the weight for postage.
mine are still atached to the car so if anyone has a set off would be good if you could weigh them so i can get a price regards tony

[RobBBoi]

I'd have a set of the mounts only aswell, but have no old ones to send over.

[EVLC36]

Now that they have settled, the extra vibration isnt really noticable any more.

I am surpised you guys dont have a company like this in the UK?

[Chris_200]

I would be interested in just mounts. Have one knackered front mount that I could part ex - don't have the others

[420gsitlover]

id have a set depending on price

[rovermadman4825]

Hi mate id be intrested in a set depending on price and turn around. i have a set of mounts off somewear. i best get digging lol

[BazR]

Now that they have settled, the extra vibration isnt really noticable any more.

I am surpised you guys dont have a company like this in the UK?

Because it would be a 'big job'

[stefaclese]

Now that they have settled, the extra vibration isnt really noticable any more.

I am surpised you guys dont have a company like this in the UK?

Because it would be a 'big job'

And cost a fortune!

[parker2245]

id be intrested depends on price, id have to send you the old set after ive changed them over

[tonyrally]

im still trying to get the price down a bit more the price they sent isnt economic imho might need to get more than ten sets.watch this space regards tony

[rovermadman4825]

Hi mate have you got any more info is it still on?

[Allanwarnock]

Im up for a set of these, depending on price.... What are they saying about the price Tony?

[-mike-]

Whats the price? I take it when you say uneconomic they are more than the standard ones?

[daz500]

Why not save on postage? ... the only mounts you need are the 3 rubber ones that the engine sits on and the lower alloy gearbox mount/insert and they shouldn't need the alloy arm in exchange because the bush simply presses in and out.

Mark @ silverstormai can get the rest of the mounts. The only other one I see still missing is the small dogbone bush which I think moto-build now supply.

[rovermadman4825]

Whats the price? I take it when you say uneconomic they are more than the standard ones?

Hi mate i contacted them a while ago and it was between £50-60 to do one of you main engine ones so that better than half price of a genuine new one and its better

[daz500]

Did this go anywhere? Who all are talking to this company anyway?