Stainless steel goodies - *battery trays, covers, bolt kits*

[vinny19791]

Ok decided to set myself up as a bronze trader and offer out a few parts after receiving a few PMs about one or two bits I had made.

Currently im selling to order

Rover 200/400 stainless steel battery trays for the R8 rover ( 1989 - 1995 pre bubble )

Something like this, though this was my prototype and I hadn't welded up the corners.

Designed to fit in the original position in your engine bay ussing 6 supplied stainless steel cap head bolts.



What the picture doesnt really make clear is the recess welded underneath so the bolts mimic the original tray and sit under the battery.

here.....



and looking like this fitted



Included in the kit is

The battery tray
The battery clamp made from stainless steel
6 s/s caphead bolts to secure tray
1 s/s hex bolt to secure the clamp down

Im looking at £35 posted for this item
if paying by PAYPAL pleae gift the payment. My prices are low enough!


My second Item is

T series stainless steel spark plug cover

After buying one from ebay and discovering it was absolutely shabby I decided to make my own out of stainless steel

This will fit any Rover 200/400/600/800 fitted with the t-series engine



Suppplied with 4 s/s caphead bolts

£15 posted
if paying by PAYPAL pleae gift the payment. My prices are low enough!


Finally

The Rover 200/400 engine dress up kit
Specifically designed for the 2.0 Turbo models, a 114 piece kit, containing s/s caphead bolts, washers etc to replace the following bolts

Headlights

Radiator support brackets (upper)

Radiator support brackets (lower)

Fan to radiator frame

Bonnet catch to body

Rocker cover bolts (visible 11) please tell me if you want the other 12 hidden normally by the lead/spark plug cover ( add £2.50 )

Spark plug cover

Inlet manifold to engine

Front coolant pipe

Power steering bracket

Wiper motor

Accelerator cable

Washer fluid pipe bracket

Fuel filler bracket

Coolant reservoir bottle

Screenwash bottle

Fan relay box

Comes with instructions but is pretty easy , replace the rusty bolts with shiny stainless steel ones



Looking for £13 posted for this kit kit 1

If you want the bolts that are normally covered by the lead/spark plug cover aswell £15.50 posted - kit 2

If you want the wing bolts and bonnet hinge bolts on top of the above £17 posted. - kit 3

if paying by PAYPAL pleae gift the payment. My prices are low enough!

[rovermadman4825]

Can you do ECU brackets

Ross

[vinny19791]

Its next on my list

I presume you want a replica or as close as possible to the original steel item? Did this incorporate a mounting point for the engine fusebox too? Or does that bolt on the back?

Either way I will take a look at it and fab something up...

Thank you

[rovermadman4825]

Its next on my list

I presume you want a replica or as close as possible to the original steel item? Did this incorporate a mounting point for the engine fusebox too? Or does that bolt on the back?

Either way I will take a look at it and fab something up...

Thank you

It would be great if you could fabricate something up oe looking or not what ever's easier for you and then al probably get the engine dress up kit also

[vinny19791]

Yeah im on it asap. I do have to work also sadly

Keep an eye on here!

thanks again

[rovermadman4825]

Al look forward for it

[will2c]

Your prices are Great mate, Will put an order in next week

[vinny19791]

Thanks will.

Incidentally if anyone has any requests I can make anything !

Current wish list from members that im looking into over this week

1. ECU bracket/fusebox holder from stainless
2. ECU cover from stainless
3. ABS cover from stainless

My costs are more dependant on my time than anything, materials are easy as my dad has a large engineering company which I have access to all manner of tools, lathes, welders, presses, plasma cutters etc etc If I can make a few quid to spend on my car whilst suppplying a product someone wants all the better imo.

[rovermadman4825]

If thats the case can you make stuff like pas fluid resivour and coolent brackets etc

[vinny19791]

I can look at reservoirs etc,

but wont be making coolant pipes as markcoupe and silverstorm make those currently and I dont want to step on others toes!

[Yeo_Ti]

id be quite into a dress up kit for a 620Ti m8, all the stainless bolts etc etc, and 1 of those spark plug covers, much we talking?

[vinny19791]

For a Ti im guessing very very similar to the 220 turbo. There are plenty of bolts and if you needed a few more I can send them out

say £25 posted for the two?

[Geo_coupe]

Would you be able to do the engine bay dress up kit minus the t-series specific bolts? Quite fancy getting rid of the rusty bolts on the D16 engine bay

[vinny19791]

ill take a look at my d series gti tonight

[matt077]

willing to take postal order for the dress up kit?

i dont want to use my paypal money as they are for the break lines

[vinny19791]

sure or bank transfer.thanks

[BlueRover]

How about M series spark plug covers ? They are a more complicated than the T series ones and I can provide dimensions if you wish.

[rovermadman4825]

How about M series spark plug covers ? They are a more complicated than the T series ones and I can provide dimensions if you wish.

I'd be intrested in them also coz I want to convert my T-series carriers to M-series one's

[vinny19791]

m series covers I could have a go at?

The dimensions need to be in mm and spot on exact. Ie hole centres etc etc. Do any of you guys have a spare cover ? That is if the m series even had an oe one? Id be willing to do the first at a discount if you could supply a cover I could copy?

[ttrw2]

I'll take 1 x full engine dress-up kit (inc. additional 11 bolts) for a T16 please. PM me your payment details.

Thanks,
Rob

[MarkCoupe]

I can look at reservoirs etc,

but wont be making coolant pipes as markcoupe and silverstorm make those currently and I dont want to step on others toes!

Vin, im done anyway mate, all we did was a group buy, got a few bits left over (mainly slam panel brackets and ti polished stuff) so anything you wanna do crack on

Edit - Having said that, he said coolant brackets Not sure what they are.

[rovermadman4825]

Edit - Having said that, he said coolant brackets Not sure what they are.

I ment the expansion tank bracket just couldnt think of its name when typed it lol

[vinny19791]

thanks ttrw , its an additional 12 actually ( all under lead / spark cover )
even I was wrong

And that meant my prices were wrong but I said add £1.50 for extra and as youve dibbed £14.50 posted!

paypal is vinny19791@hotmail.co.uk

Ill get it out to you tomorrow

thanks

[vinny19791]

I can look at reservoirs etc,

but wont be making coolant pipes as markcoupe and silverstorm make those currently and I dont want to step on others toes!

Vin, im done anyway mate, all we did was a group buy, got a few bits left over (mainly slam panel brackets and ti polished stuff) so anything you wanna do crack on

Edit - Having said that, he said coolant brackets Not sure what they are.

thanks mark

[vinny19791]

Edit - Having said that, he said coolant brackets Not sure what they are.

I ment the expansion tank bracket just couldnt think of its name when typed it lol

So the black bracket that holds the coolant tank in stainless?

[rovermadman4825]

Yes mate but I was just using it as an example along with the pas bracket. I want to get rid of most of the oe brackets for shinny stainless items, and am sure alot of people on here would want them aswell

I think i've got a stainless steel fetish

[vinny19791]

ok i will look into it.

Thank you

[vinny19791]

Would you be able to do the engine bay dress up kit minus the t-series specific bolts? Quite fancy getting rid of the rusty bolts on the D16 engine bay

Hello mate

Had a quick look under my engine bay and worked out what I can do.

D16 dress up kit

As mine has a red honda cover it uses capped nuts rather than bolts, and im unsure what the rover rocker cover is like.

But I can do a bolt kit.
80 pieces in total

Wing bolts
Bonnet hinge bolts
bonnet latch bolts
headlight bolts
rad support bolts
air pipe intake bolts
power steering res bolts
coolant bottle bolts
washer bottle bolts
wiper motor olts
fuel filter bolts
fusebox bolts
vacuum pump bolt
power steering pipe clamp bolt

£13 posted

[vinny19791]

I'll take 1 x full engine dress-up kit (inc. additional 11 bolts) for a T16 please. PM me your payment details.

Thanks,
Rob

hey ttrw I have you kit bagged up

[Geo_coupe]

Would you be able to do the engine bay dress up kit minus the t-series specific bolts? Quite fancy getting rid of the rusty bolts on the D16 engine bay

Hello mate

Had a quick look under my engine bay and worked out what I can do.

D16 dress up kit

As mine has a red honda cover it uses capped nuts rather than bolts, and im unsure what the rover rocker cover is like.

But I can do a bolt kit.
80 pieces in total

Wing bolts
Bonnet hinge bolts
bonnet latch bolts
headlight bolts
rad support bolts
air pipe intake bolts
power steering res bolts
coolant bottle bolts
washer bottle bolts
wiper motor olts
fuel filter bolts
fusebox bolts
vacuum pump bolt
power steering pipe clamp bolt

£12 posted

great stuff vinny, the standard rocker cover is on with capped nuts too so thats cool ill take one o these kits off you, you have pm.

[vinny19791]

Pm back at you.

Let me know how you get on, if i need to add or remove anything bolt wise from the kit, you're my triallist

[vinny19791]

At the workshop tomorrow

Would anyone be interested in a stainless steel turbo fan / rad frame?Price dependant of course

Ive noticed that the standard frame which the two fans bolt too is rusty

Im going to make one for myself, but of course if its easy I can supply more.

Just need to work a cost out of the steel tbh

Thanks for looking

[will2c]

At the workshop tomorrow

Would anyone be interested in a stainless steel turbo fan / rad frame?Price dependant of course

Oh me me me the Radiator frame would look ace against my new Alloy Radiator from the group buy

Is there any end to what you can produce

[rovermadman4825]

At the workshop tomorrow

Would anyone be interested in a stainless steel turbo fan / rad frame?Price dependant of course

Oh me me me the Radiator frame would look ace against my new Alloy Radiator from the group buy

Is there any end to what you can produce

A stainless radiator frame woud look

[vinny19791]

At the workshop tomorrow

Would anyone be interested in a stainless steel turbo fan / rad frame?Price dependant of course

Oh me me me the Radiator frame would look ace against my new Alloy Radiator from the group buy

Is there any end to what you can produce

Going to work out a costing for it, materials may be more, need to find out

But doesnt look to be too hard to produce, and I agree mated with alloy rad would look cool. And not rusty