Stainless manifold flanges for T16 - for tubular manifold

RY220 · Post by **RY220** » Thu Aug 12, 2010 1:45 pm

Payment sent.

daz500 · Post by **daz500** » Thu Aug 12, 2010 1:47 pm

It'll be tonight when I get home - paypal don't like my works American IP address. They seem to think someone is hacking my account to make international payments

Post by **Cableguy** » Thu Aug 12, 2010 1:52 pm

Thats cool , only really tongon to speak up and were on a winner.

Cheers

Drew · Post by **Drew** » Thu Aug 12, 2010 6:00 pm

Cableguy wrote:Not sure Drew, if its yours i thank you !

Took a couple of pics , and overlaid a scan of a gasket on top of the drawing.

Theres naff all in it , so im going to stick with the original drawing ( if people want the holes a bit bigger it will take about half a second to reem the holes open further with a die grinder before welding anyway.

looks like it, i gave it to someone a while ago, glad its of use.

you can drill stainless, even though it will be harder (heat cycled) once lasered, just run the drill very slow and use lots of cutting fluid.

Drew

tongon06 · Post by **tongon06** » Thu Aug 12, 2010 7:31 pm

all paid sorry about the delay

RY220 · Post by **RY220** » Sat Aug 14, 2010 8:02 am

I've been trying to find a manifold to use for fitting to these flanges and came across a group buy that was going on Nov last year from Grant and for 5+ it was £135 +15 postage,has anyone allready got one for cutting up?if not should we see if we can get a similar deal on them?

tongon06 · Post by **tongon06** » Sat Aug 14, 2010 11:02 am

RY220 wrote:I've been trying to find a manifold to use for fitting to these flanges and came across a group buy that was going on Nov last year from Grant and for 5+ it was £135 +15 postage,has anyone allready got one for cutting up?if not should we see if we can get a similar deal on them?

here you go mate http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT

Post by **Cableguy** » Mon Aug 16, 2010 4:53 pm

If Daz pays we could get these here by Wednesday , and with you ugly lot by around Friday

daz500 · Post by **daz500** » Mon Aug 16, 2010 8:21 pm

Sorry

Let me correct the situation.

Post by **Cableguy** » Mon Aug 16, 2010 9:00 pm

Go on then.......

Post by **Cableguy** » Fri Aug 20, 2010 7:31 pm

mike88 · Post by **mike88** » Fri Aug 20, 2010 7:45 pm

your rug looks like worms

daz500 · Post by **daz500** » Fri Aug 20, 2010 7:48 pm

I see 6 there

Just as long as I don't get the home aloner bent ones I'll be happy

tongon06 · Post by **tongon06** » Fri Aug 20, 2010 9:03 pm

mike88 wrote:your rug looks like worms

daz500 · Post by **daz500** » Fri Aug 20, 2010 9:28 pm

Here's something - are those holes a little too close to the edges of the flange?

tongon06 · Post by **tongon06** » Fri Aug 20, 2010 11:53 pm

daz500 wrote:Here's something - are those holes a little too close to the edges of the flange?

dont seem to be

Post by **Cableguy** » Sat Aug 21, 2010 2:00 am

Seem fine to me , they are to drawing as per previous posts and drew has used the same clearances in the past.

Doesnt leave much gasket showing either.

Daz, there is unfortunately a slight warp of a couple of mm. The amount of heat that goes in to cutting them lifts them a little due to the amount of material we have taken away.

I had a word and this is unavoidable tbh , the solution is to get it skimmed after welding....

I can get it skimmed for you before despatch , but that means making it thinner , and then when you have welded it i suspect its going to warp again and you will need to skim it further so its entirely up to you

The warp at the moment is something that if your welding didnt make it any worse, would be taken out with the gasket and the pressure of the bolts clamping it.

RY220 · Post by **RY220** » Thu Aug 26, 2010 1:23 pm

When will these be sent out mate?

Gibbo · Post by **Gibbo** » Thu Aug 26, 2010 1:32 pm

mike88 wrote:your rug looks like worms

It may look like worms but its a treasure chest i bet you cud make an entire wiring loom from all the offcuts

Its dan's wiring loom bench lol

RY220 · Post by **RY220** » Wed Sep 29, 2010 1:59 pm

Has anyone got their manifold built yet?i'm in the process of doing mine and have found the tracts to be quite abit smaller than the size of the flange,dont know if this will affect flow or not,any feedback would be great,

cheers.

_vitesse_ · Post by **_vitesse_** » Thu Nov 04, 2010 11:44 pm

Any manifolds built yet?

vinny19791 · Post by **vinny19791** » Sat Nov 06, 2010 4:49 pm

a bump on this

any chance of another group buy?

Allanwarnock · Post by **Allanwarnock** » Wed Nov 10, 2010 2:09 am

vinny19791 wrote:a bump on this

any chance of another group buy?

+1 really want a nice manifold...

RY220 · Post by **RY220** » Fri Nov 12, 2010 8:11 am

Here's acouple of pics of mine so far,

The welding's abit dodgy,time to file and smooth it all don then reweld and smooth off,then get it skimmed and heat wrapped,it's going to be tight against the alternator,fingers crossed.

_vitesse_ · Post by **_vitesse_** » Fri Nov 12, 2010 8:31 pm

Nice job, lots more pictures from all angles would be good.

RY220 · Post by **RY220** » Thu Nov 18, 2010 7:47 am

Tried manifold on car yesterday,fits head perfect,tracts clear step on head and alternator but bottom flange is a mile off turbo needs brought forward an inch and need to lengthen bottom part by an inch,abit gutted,thought the flange wouldnt be that far away,i'll get more pics up when i get time,on a plus note it looks good when it's on.

tim61uk · Post by **tim61uk** » Thu Nov 18, 2010 1:53 pm

Hi guys which 200sx tubular manifold is the one to buy to make your own tubular manifold, i have one but its a million miles off and is there any more flanges left to purchase.

Post by **Cableguy** » Thu Nov 18, 2010 2:19 pm

I can do another group buy of 5 if people are interested.

Daz had some reservations after receiving his that the flange didnt have enough meat around the bolt holes at the outsides and that the holes werent 100% bang on, if someone could comment and decide if they want any changes made and then start adding names i can sort it out

Post by **Cableguy** » Wed Dec 08, 2010 9:45 am

Just to let people know , i am about to host another group buy on these.

New prices for bulk before the VAT goes up is

£36.97 delivered for 15 orders, i am still trying to get it a little better than this so check the thread that goes up.

Cheers

RY220 · Post by **RY220** » Sun Jan 23, 2011 9:18 pm

heres some pics of mine done

Rovertech 2.0

Stainless manifold flanges for T16 - for tubular manifold

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol

Re: Stainless manifold flanges for T16 - for tubular manifol