Rear Lower Strut Braces for R8/45/ZS/400

[reggy5]

11. Roverdose214 - Awaiting Payment.. - Likely to never happen in a year of sundays

[Cableguy]

Ok guys 1 left in weld in guise , no more bolt ons left for the time being. Can arrange another batch if a couple of people want bolt ins though.

Also if your localish pop round and we can weld the last one in for £50 all in.

[1994 BRG Coupe]

Does that mean mine's in the post?

[Cableguy]

Does that mean mine's in the post?

Yep

All of them have been sent out other than Reggy who i am meeting , and Rav and Brads who will get theirs tommorow

[420gsitlover]

ok thanks dan more work to do

[Roverdose214]

.

[1994 BRG Coupe]

Thanks, It arrived yesterday. Still got to unpack it and work out how to fit it but have a few other priorities

Any chance of an instalation guide/picture

[420gsitlover]

cheers dan got mine today nice bit of kit !

[James ZS]

Any chance any more of these will be made up in the near future?

[Roverdose214]

Are you 100% certain you could use these on the ZS? as where you weld/bolt it there are fixed metal brake lines etc.

[James ZS]

Are you 100% certain you could use these on the ZS? as where you weld/bolt it there are fixed metal brake lines etc.

Did you not buy one in the end then?!

[Roverdose214]

Are you 100% certain you could use these on the ZS? as where you weld/bolt it there are fixed metal brake lines etc.

Did you not buy one in the end then?!

Nope i got a moto build one, which Dan refers to as chesse

[Cableguy]

Are you 100% certain you could use these on the ZS? as where you weld/bolt it there are fixed metal brake lines etc.

No such thing as a fixed metal brake line , and yes im sure

[Roverdose214]

Whens the next batch due? and how much for you to weld it for me?

And there are some brake lines on there im 100% certain of that.

[Cableguy]

Whens the next batch due? and how much for you to weld it for me?

And there are some brake lines on there im 100% certain of that.

£15 to weld it in , and theres no brake lines in the way, infact theres no brake lines anwyhere near your talking about ABS cables which are on the rear.

Next batch i will start up when i get some interest , so far only one person needs one , need a minimum of 5 really, if people wanna start putting names down again i wil happily get it sorted.

[James ZS]

That's understandable, cableguy have you ever ventured on to themgzs.co.uk you may be able to add some names to the list. I know of a few who have mentioned wanting some over there.

(mods please feel free to delete if you feel inapproprite)

[Cableguy]

That's understandable, cableguy have you ever ventured on to themgzs.co.uk you may be able to add some names to the list. I know of a few who have mentioned wanting some over there.

(mods please feel free to delete if you feel inapproprite)

Im not a member over there and dont just want to push my business.

However, if you want to host it and be the intemdiory for me, get a GB of 10 people and ill get yours to ya door for sweet FA

[James ZS]

Have got a thread going, as anyone got a pic of one fitted to their ZS?

[james3990]

I have one of cableguys which was welded on to my Coupe

[Xog]

I'd be interested in one of these (bolt-on)

[Cableguy]

I can do them but i need a minimim of 5 orders

[Stevo135+]

Dan do you think it would be possible to triangulate this lower brace in the vertical axis, so that it can bolt to the underside of the boot floor of an R8 coupe just infront of the spare wheel location. Then i'm thinking of getting a 3point rear upper brace made up, so that the mounts for this would also pick up in the same place but inside the boot floor, and the idea would be to bolt the braces together in a sandwich through the floor?

I don't know for certain if this would all work out and fit where im thinking it might go, but if you have facilities to make a custom 3point lower brace that could be suitable for this job then id be very interested to have one made up.

[Cableguy]

I can make whatever you want, but the whole point of the lower brace is to hold the lower arms in place, moving its location will allow these to flex mate

[Hayleyb]

I know this thread is a bit old now but if enough interest could you do another batch of these?

Very interested if you can.

Cheers
Hayley

[Cableguy]

Certainly can , would need 5 off really.

[Hayleyb]

come on then peeps who wants one??

Does it make much difference whether its bolted on or welded?

[Cableguy]

I doubt you would notice on the road to be honest.

[peteT16]

I'd be up for a bolt on one, assuming they are the same for R8 and ZS as they both share the same rear suspension.

[Hayleyb]

Think i will just have a bolt on one then please.

[Cableguy]

I'd be up for a bolt on one, assuming they are the same for R8 and ZS as they both share the same rear suspension.

Thats right, so we have 2 , another 3 please guys

[peteT16]

I'll ask on the mgzs.co.uk

[russ220]

is it bad that i still havent fitted the last one i brought from you a few years ago Dan?

i found it other day clearing out the garage

[stefaclese]

is it bad that i still havent fitted the last one i brought from you a few years ago Dan?

i found it other day clearing out the garage

Took me over 2 years to fit mine!

[220Lee]

What sort of price are we looking at delivered?

[Cableguy]

Cost is on page 1 mate, £35 delivered