Brembodge Group Buy 2

[James ZS]

Ive got 17" Pro Race 1.2s fitted and have LOADS of clearance!

Edit: Just been to check and on the ZS hub I have 10mm clearance

[ourafilmes]

That´s what I wanted to read!
Thanks!

[ttrw2]

We have a kit using a slightly smaller version of the 326mm disc (318mm IIRC) that will fit. It's designed primarily to fit behind a Hairpin and BRM wheel. Haven't really progressed it as there doesn't seem to be that much interest?

Would work with Pug and Renaultsport Brembo calipers too.

just noticed this, how would they compare to the 326mm disc setup braking wise? id be interested in a set for the coupe, looked at your original kits but didnt fancy risking having to get rid of the rotas!

Yeah obviously they'd have reduced maximum braking torque compared to the 326mm kit, but I very much doubt anyone (even on track) runs full pedal pressure that often as the braking force is pretty awesome....so real world I doubt you'd see a difference. And as Dan says more likely the lighter D16 will help.

I think a 16" ROTA might fit over the 326mm kit though. A 16" Superleg would do....


Ouralfilmes, glad they got to you safely mate. They might look impressive off the car - but believe me they're best on!

Cheers
Rob

[ttrw2]

Ive got 17" Pro Race 1.2s fitted and have LOADS of clearance!

Edit: Just been to check and on the ZS hub I have 10mm clearance

By far and away the roomiest wheel in that case!

[ourafilmes]

Ive got 17" Pro Race 1.2s fitted and have LOADS of clearance!

Edit: Just been to check and on the ZS hub I have 10mm clearance

Sorry but I don´t get it... Maybe my english is tricking me... You need hubs with those wheels or I did understand wrong??

[James ZS]

Ive got 17" Pro Race 1.2s fitted and have LOADS of clearance!

Edit: Just been to check and on the ZS hub I have 10mm clearance

Sorry but I don´t get it... Maybe my english is tricking me... You need hubs with those wheels or I did understand wrong??

No Ive fitted mine on a ZS wasnt sure if it makes any difference for the spacing but thinking about it now it cant! I was having a stupid moment

[Geo_coupe]

Yeah obviously they'd have reduced maximum braking torque compared to the 326mm kit, but I very much doubt anyone (even on track) runs full pedal pressure that often as the braking force is pretty awesome....so real world I doubt you'd see a difference. And as Dan says more likely the lighter D16 will help.

I think a 16" ROTA might fit over the 326mm kit though. A 16" Superleg would do....

hmmm, ive taken a measurement as per method 2 from your project thread, think it would be enough to clear the 326's?

Rota Boosts 16x7 - ET?? - ZS180 282 brakes - 50.5mm

[ourafilmes]

Ive got 17" Pro Race 1.2s fitted and have LOADS of clearance!

Edit: Just been to check and on the ZS hub I have 10mm clearance

Sorry but I don´t get it... Maybe my english is tricking me... You need hubs with those wheels or I did understand wrong??

No Ive fitted mine on a ZS wasnt sure if it makes any difference for the spacing but thinking about it now it cant! I was having a stupid moment

OK.

[ttrw2]

hmmm, ive taken a measurement as per method 2 from your project thread, think it would be enough to clear the 326's?

Rota Boosts 16x7 - ET?? - ZS180 282 brakes - 50.5mm

About the same spoke-offset as the MG-Straights, which I believe NeilBaker86 fitted with a 6mm MItus spacer.

[C2K]

Epic team dynamics PR2 clearance!

Miguel, pleased to see it all turned up ok. Thanks for the participation, speaks volumes for us too as traders to be trusted in the manner that you did.

[ourafilmes]

Miguel, pleased to see it all turned up ok. Thanks for the participation, speaks volumes for us too as traders to be trusted in the manner that you did.

Thank you! I am really happy with this kit! Good work! Keep the level high!

[218si]

Shame as I have some Adendums too

Any other options anyone knows of?

[ttrw2]

Options of what?

[218si]

Big brakes for an MG ZS that arent over £900!

[C2K]

buy ours and give up the wheels

[ttrw2]

Mitus made a kit using 316mm Bini discs and MGTF AP calipers. Search Mitus 316mm Cooper and I'm sure the project thread will come up

[Grant620]

Do these work with Mitsi EVO Brembos?

[C2K]

Not sure Grant. Do you have the lug spacing measurement? That would be the first qualifying point.

[< KEVIN >]

Is there part number for the solid vented discs?

[SammyP]

Quick question. Spacing out for a 25/ZR compared to the coupe. I've been told its 3 washers. However the problem I have is if I put a washer between the bracket and the hub then theres dangerously little thread to keep it there. Remove the washer and thus remove a washer from the spacing... Ala -



Only reason I ask is, 3 washers fit as well and seem about the same!

[ttrw2]

There should 100% never ever be a washer between the bracket and upright. Whoever told you this requires extermination....

The bracket supplied and hub should be in contact. Have you referred to the instructions supplied?

[SammyP]

There should 100% never ever be a washer between the bracket and upright. Whoever told you this requires extermination....

The bracket supplied and hub should be in contact. Have you referred to the instructions supplied?

Nothing in paper was supplied. Glad it just wasnt me being a goon then... Got a link/PM/something?

Cheers

[< KEVIN >]

That's the way mines are set up, bracket bolted to hub, no washers other than the one on the bolts but 3 in between caliper and bracket.

Is that correct?

[SammyP]

That's the way mines are set up, bracket bolted to hub, no washers other than the one on the bolts but 3 in between caliper and bracket.

Is that correct?

Both 2 and 3 look good. So bother knows!

[tompinney]

Got a link/PM/something?

http://rover-coupe.com/rcoc/index.php?o ... structions

I don't believe Rob has updated the instructions in any way since he gave me this version.

[1234dist]

Is there any plans for a second group buy on these?

[Sneekyparrot]

Is there any plans for a second group buy on these?

I just ordered mine direct from rob, drop him a pm.

P.

[ourafilmes]

Is there any plans for a second group buy on these?

This was the 2nd Group buy.
You mean 3rd! Contact Rob.

[1234dist]

ok two questions:

Whats rob's pm
how much is the full brembodge kit, on reading this initial price is just for the disc's and fixing kit. You have to pick your own calipers, brake lines, pads ect.

I am lazy, i just want a full kit

[Berger]

ok two questions:

Whats rob's pm
how much is the full brembodge kit, on reading this initial price is just for the disc's and fixing kit. You have to pick your own calipers, brake lines, pads ect.

I am lazy, i just want a full kit

I don't think Rob will sell you a full kit unless he has a set of calipers, its easier for people to find them on their own and it allows them to get them cheap if possible!

I'd budget about $550-650 for a complete set, depending on what you pay for your calipers and choice of pads.

[Sneekyparrot]

ok two questions:

Whats rob's pm
how much is the full brembodge kit, on reading this initial price is just for the disc's and fixing kit. You have to pick your own calipers, brake lines, pads ect.

I am lazy, i just want a full kit

He is ttrw2, pm him buy clicking on his post a few above this one.

Sorry bud but u gonna hav to put some effort in, it's all available on fleabay if u are not about prices.
Unless someone has one for sale I doubt rob is going to outlay for everything given that some messed him around money wise with just the kit.

Or give Martin a call at reylands and take him a wad of cash with the car and he will fit them for u or spend some big bucks on a wilwood kit.

SP.

[Supercharged_Z]

has anybody any decent links to pads and track pads at that?

[ttrw2]

Ferodo DS3000
Ferodo DS1.1 (Clio Cup race compound)

Camskill sell all these

[Supercharged_Z]

do you have the part numbers? i am struggling to find.

cheers
Ross

[ttrw2]

No probs

DS3000:
http://www.camskill.co.uk/m49b1459s4045 ... Brake_Pads

DS1.1 (uber):
http://camskill.co.uk/m49b0s4045p53830/ ... Brake_Pads