Rear de-wiper bungs

Hayleyb · Post by **Hayleyb** » Sat Mar 21, 2009 9:40 pm

Recieved mine today, thanks.
Will sort them picks out for you soon, car is in bits at the mo as been fitting the T28

Thanks again
Hayley

Coupe100 · Post by **Coupe100** » Sun Mar 22, 2009 9:07 pm

Got any of these left? I could do with one.

james26386 · Post by **james26386** » Mon Apr 06, 2009 1:11 pm

Bumpety bump - got a few left...

james26386 · Post by **james26386** » Sun Apr 26, 2009 12:39 pm

All gone - if there's much more interest I will try and get hold of some more...

ttrw2 · Post by **ttrw2** » Thu May 14, 2009 10:34 am

I know you've sold out, but what diameter hole do these fit? I've lost the rear wiper on my hatch and would like to plug the hole...that's 28mm.

Cheers
Rob

Yeo_Ti · Post by **Yeo_Ti** » Thu May 14, 2009 12:52 pm

hey im looking for 1 of these for the mrs wee punto gt3, the hole on tailgate is 1 and a quarter inch, would this 1 fit it m8?

james26386 · Post by **james26386** » Thu May 14, 2009 1:12 pm

ttrw2 wrote:I know you've sold out, but what diameter hole do these fit? I've lost the rear wiper on my hatch and would like to plug the hole...that's 28mm.

Cheers
Rob

Coupe is 23mm off the top of my head so don't think one of these is what you'd be after.

There is a guy on ebay who sells metal ones which might be more suitable?? He is on here as well and I think he gave this thread a good hi-jacking about them - but as I'm not one to hold a grudge, I thought I'd post up anyway - until I meet him in person when I plan to poke his eyes out with a screwdriver!

Yeo_Ti wrote:hey im looking for 1 of these for the mrs wee punto gt3, the hole on tailgate is 1 and a quarter inch, would this 1 fit it m8?

Who works in inches these days?!

Think that's about 31mm, so unfortunately not.

james26386 · Post by **james26386** » Mon Jul 06, 2009 11:36 am

Bumpety bump - got hold of some more - first come, first served!!

Roger Red Hat · Post by **Roger Red Hat** » Mon Jul 06, 2009 9:32 pm

meeeeeeee!!!

russ220 · Post by **russ220** » Tue Jul 07, 2009 1:20 pm

i'll certainly take one! PM'd

james26386 · Post by **james26386** » Tue Jul 07, 2009 2:28 pm

roger red hat wrote:meeeeeeee!!!

For your hatch?? If so, not sure if it is the same size fit...

Roger Red Hat · Post by **Roger Red Hat** » Tue Jul 07, 2009 10:35 pm

oh!

=(

james26386 · Post by **james26386** » Wed Jul 08, 2009 10:38 am

roger red hat wrote:oh!

=(

Go measure your hole!!

james26386 · Post by **james26386** » Tue Jul 21, 2009 12:12 pm

Bump for the lovely weather the UK is currently receiving!!

Post by **Cableguy** » Fri Mar 12, 2010 12:46 am

Can you still get me some dude ?

I need 1 please and i need one thats a little smaller for a pug ( can get measurements if you think you can do something )

Neill · Post by **Neill** » Fri Mar 12, 2010 6:01 pm

james26386 · Post by **james26386** » Sat Mar 13, 2010 11:42 am

Cableguy wrote:Can you still get me some dude ?

I need 1 please and i need one thats a little smaller for a pug ( can get measurements if you think you can do something )

Yup I still have a few more... can sort you out with one whenever, I think payment details are in the thread somewhere...!

If it's a 306 (iirc) then the right size bungs can be got from hellfrauds as that is what a friend of mine did - it is quite a bit smaller than the coupe. I think he had to buy a mutlipack to get just the one, but was still pretty cheap with a trade card.

Post by **Cableguy** » Mon Mar 15, 2010 11:20 am

james26386 wrote:
Cableguy wrote:Can you still get me some dude ?

I need 1 please and i need one thats a little smaller for a pug ( can get measurements if you think you can do something )

Yup I still have a few more... can sort you out with one whenever, I think payment details are in the thread somewhere...!

If it's a 306 (iirc) then the right size bungs can be got from hellfrauds as that is what a friend of mine did - it is quite a bit smaller than the coupe. I think he had to buy a mutlipack to get just the one, but was still pretty cheap with a trade card.

Cool , fire me two over then ill keep one as a spare, what am i looking for in halfords, are they actually sold as wiper bungs ?

Ill send payment once i have dug out the payment details

james26386 · Post by **james26386** » Tue Mar 16, 2010 11:30 am

Cableguy wrote:
james26386 wrote:
Cableguy wrote:Can you still get me some dude ?

I need 1 please and i need one thats a little smaller for a pug ( can get measurements if you think you can do something )

Yup I still have a few more... can sort you out with one whenever, I think payment details are in the thread somewhere...!

If it's a 306 (iirc) then the right size bungs can be got from hellfrauds as that is what a friend of mine did - it is quite a bit smaller than the coupe. I think he had to buy a mutlipack to get just the one, but was still pretty cheap with a trade card.
Cool , fire me two over then ill keep one as a spare, what am i looking for in halfords, are they actually sold as wiper bungs ?

Ill send payment once i have dug out the payment details

No probs - just stick your address down with the payment (jamesmoseley26@hotmail.com for paypal) and I'll get them out to you.

As for what to look for in halfords, I can't remember what they are down as, but they def aren't sold as de-wiper bungs. Might be something to do with electrical bits...

Post by **Cableguy** » Tue Mar 16, 2010 11:37 am

Wicked, whats the price for 2 delivered dude ?

james26386 · Post by **james26386** » Tue Mar 16, 2010 12:45 pm

Cableguy wrote:Wicked, whats the price for 2 delivered dude ?

Knock off the price of a large letter stamp - about 50p... call it £3.50.

james26386 · Post by **james26386** » Sun May 09, 2010 6:06 pm

Bump this whilst I am doing jack all with my time!

I have got 9 left, and this time I don't think I can get any more.

Cableguy - after reading through this thread and seeing how many times you have asked for a couple, maybe this time you'll add it to your 'to-do list!!'

Just occured to me that this might be against the trader rules, a pm will be heading someone's way...

daz500 · Post by **daz500** » Sun May 09, 2010 7:00 pm

Would these fit a zr?

Post by **Cableguy** » Sun May 09, 2010 10:17 pm

james26386 wrote:Bump this whilst I am doing jack all with my time!

I have got 9 left, and this time I don't think I can get any more.

Cableguy - after reading through this thread and seeing how many times you have asked for a couple, maybe this time you'll add it to your 'to-do list!!'

Just occured to me that this might be against the trader rules, a pm will be heading someone's way...

Yeah i was gonna send the payment till i found them in maplin , qty 10 @ £2.50 sorry

james26386 · Post by **james26386** » Mon May 10, 2010 12:32 am

Cableguy wrote:
james26386 wrote:Bump this whilst I am doing jack all with my time!

I have got 9 left, and this time I don't think I can get any more.

Cableguy - after reading through this thread and seeing how many times you have asked for a couple, maybe this time you'll add it to your 'to-do list!!'

Just occured to me that this might be against the trader rules, a pm will be heading someone's way...
Yeah i was gonna send the payment till i found them in maplin , qty 10 @ £2.50 sorry

Touche, had no idea you could get them anywhere else, let alone as cheaply.

Probably shoulda let me know by PM, but hey ho!

daz500 wrote:Would these fit a zr?

Unfortunately not.

Post by **Cableguy** » Mon May 10, 2010 9:09 am

They do fit a ZR dude, i used both of yours that you sent me previously both on a coupe and on a ZR

james26386 · Post by **james26386** » Mon May 10, 2010 10:32 am

Cableguy wrote:They do fit a ZR dude, i used both of yours that you sent me previously both on a coupe and on a ZR

Ah didn't realise that - maybe I'm getting confused with measurements for a hatch that I got sent once.

Think the coupe hole is about 33mm from memory.

jase · Post by **jase** » Wed Feb 01, 2012 9:09 pm

These still available? Im using something i found on the floor topped up with white silicone sealent!!

J

Rovertech 2.0

Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs

Re: Rear de-wiper bungs